
- NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.
- Angular Contact Ball Bearings Cam Follower and Track Roller - Stud Type Cartridge Unit Bearings
- AddressCircuito Progreso No.120, Industrial Park of Automotive Logistics (PILA), C.P. 2040, Aguascalientes,
- Phone(Working Time)922-5268
Cam Follower and Track Roller - Stud Type
Contact NowTypes Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.
Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1.
Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.
INA PWKR52-2RS Cam Follower and Track Roller - Stud Type
93000 N | 3800 rpm |
70.000 mm | 2.00 mm |
INA PWKR62-2RS Cam Follower and Track Roller - Stud Type
Open Type | C3 |
0.02 KGS | 22338-k-mb-c3-qbl |
SMITH NUKR-40 Cam Follower and Track Roller - Stud Type
120mm | In Stock |
Open Type | 0.02 KGS |
SMITH NUKR-30 Cam Follower and Track Roller - Stud Type
1.063 Inch | Standard |
4.5 Inch | In Stock |